Quick question: Is the extruder nozzle supposed to be touching the print when it
|
|
4
|
266
|
January 8, 2019
|
Hi, Anyone using Marlin Power loss recovery with the latest Marlin?
|
|
4
|
1241
|
January 7, 2019
|
I have been playing around with PETG and while my sides and tops look
|
|
7
|
299
|
January 6, 2019
|
Does anyone have a workflow or tool for producing multi color / multi material
|
|
0
|
201
|
January 4, 2019
|
Hello. I'm going to throw the new firmware into the board...
|
|
0
|
149
|
January 4, 2019
|
My Ender 3 only prints 1/4 of a project.
|
|
0
|
170
|
January 4, 2019
|
Hello to you all,
|
|
1
|
170
|
December 31, 2018
|
Hey guys, im new to 3d printing and have come here for help! I
|
|
0
|
137
|
December 30, 2018
|
Can someone please help me with what upgrades/settings I need to change with my
|
|
6
|
147
|
December 30, 2018
|
I got a new heater block for my TronXY X5ST.
|
|
3
|
186
|
December 30, 2018
|
What am I doing wrong?
|
|
8
|
194
|
December 28, 2018
|
We have FDM and we make FDM machines.
|
|
26
|
514
|
December 26, 2018
|
Good day friends, I'm new to 3d technology I bought a creder ender3 but
|
|
3
|
170
|
December 23, 2018
|
* Looking for a 3D printing service * Hi,
|
|
5
|
161
|
December 23, 2018
|
Hi All, I am new to this world so need a bit of advice.
|
|
3
|
151
|
December 23, 2018
|
Hi I looking for someone to help out with printing in the UK.
|
|
2
|
173
|
December 22, 2018
|
Curious, What is the minimum price for printing (per cm3,
|
|
3
|
140
|
December 13, 2018
|
Looking for a mentor / adviser.
|
|
3
|
153
|
December 10, 2018
|
Help! I've bought a Creality CR-10S4 and assembled it.
|
|
0
|
161
|
December 9, 2018
|
I'm having consistent issues on certain layers of all of my prints.
|
|
28
|
271
|
December 7, 2018
|
I am looking for a step-up from TinkerCAD,
|
|
4
|
289
|
December 6, 2018
|
Hello, does anyone know how can I solve this problem??
|
|
8
|
172
|
December 5, 2018
|
Hi folks, I'm looking for another "budget" FDM printer and thought I'd made a
|
|
6
|
139
|
December 5, 2018
|
Hello Everyone. Not sure if this is the right community to ask this question,
|
|
5
|
127
|
December 4, 2018
|
What are some ways to unclog a UPrint se.
|
|
1
|
208
|
November 28, 2018
|
If I set up Octoprint on a Pi,
|
|
12
|
211
|
November 27, 2018
|
Any idea why this kind of texture is happening? Im printing on ABS,
|
|
14
|
225
|
November 27, 2018
|
I really wish there was a 32bit controller board, small size,
|
|
41
|
437
|
November 25, 2018
|
Any of you geniuses here have any idea how i could go about modeling
|
|
30
|
286
|
November 24, 2018
|
All of a sudden my Ramps boards were not working.
|
|
7
|
203
|
November 24, 2018
|