"Brittle" PLA prints - layers not sticking together.
|
|
14
|
2476
|
December 29, 2020
|
Is printing in petg create toxic fumes? Or is it safe like PLA?
|
|
8
|
10244
|
December 21, 2020
|
How do I determine what gcode flavor to use with a 3D printer?
|
|
4
|
1439
|
December 21, 2020
|
I am planning to use Ribbon cable for my 3D printer
|
|
16
|
907
|
March 29, 2019
|
Uneven Z plane surface
|
|
7
|
269
|
March 23, 2019
|
Am I squirting too much or too little filament?
|
|
14
|
150
|
March 13, 2019
|
So where is everybody going? MeWe or makerforums?
|
|
14
|
147
|
March 3, 2019
|
I dont like using the word 'best' for anything but lets just allow me
|
|
5
|
85
|
March 2, 2019
|
MOON SHOT! Ideas Needed!! i just read the email below from one of our
|
|
6
|
94
|
March 1, 2019
|
It is my first time I need to switch from my beloved reliable low
|
|
7
|
85
|
February 17, 2019
|
Need Help Fixing Heater Error I recently installed an all-metal hot end for my
|
|
4
|
78
|
January 19, 2019
|
Ok, here's my noob-question:
|
|
20
|
202
|
February 13, 2019
|
Appreciate the efforts of the conductor of this community who was ThantiK during those
|
|
13
|
104
|
February 6, 2019
|
Quick survey - We have a hotend and it has a PCB mounted on
|
|
13
|
88
|
February 3, 2019
|
Hello, I am trying to use one of the GPIO pins of RAMPS to
|
|
2
|
64
|
January 31, 2019
|
Ok so I currently have an Ender 3 printer and it's been pretty amazing
|
|
14
|
378
|
January 28, 2019
|
My last layer looks like this on my model.
|
|
16
|
90
|
January 27, 2019
|
I have upgraded my AM8 to an E3D V6 Bowden Setup.
|
|
20
|
286
|
January 24, 2019
|
Hi all, a quick question about CAD software.
|
|
9
|
69
|
January 23, 2019
|
Hi, I am new to this group and also I know nothing about 3D
|
|
18
|
86
|
January 21, 2019
|
Peter van der Walt and Thomas Sanladerer ,
|
|
10
|
87
|
January 20, 2019
|
I have a question about what is possible with 3D printing.
|
|
5
|
68
|
January 19, 2019
|
CR10S-Pro burying nozzle in bed Used the Pro on Tuesday night, worked fine,
|
|
2
|
70
|
January 17, 2019
|
Hello guys, I am having this first layer issue.
|
|
6
|
71
|
January 15, 2019
|
ThantiK did you ever figure out where you were going to move this group?
|
|
13
|
81
|
January 13, 2019
|
Question. I have a Monoprice printer and am running Cura software.
|
|
4
|
64
|
January 10, 2019
|
Quick question: Is the extruder nozzle supposed to be touching the print when it
|
|
4
|
71
|
January 8, 2019
|
Hi, Anyone using Marlin Power loss recovery with the latest Marlin?
|
|
4
|
421
|
January 7, 2019
|
I have been playing around with PETG and while my sides and tops look
|
|
7
|
70
|
January 6, 2019
|
Does anyone have a workflow or tool for producing multi color / multi material
|
|
0
|
67
|
January 4, 2019
|