|
Machine is done and the first test cut was completed this evening.
|
|
0
|
250
|
December 16, 2018
|
|
So the physical build is complete and I wanted to share a couple of
|
|
22
|
612
|
December 15, 2018
|
|
A couple of gun calendars done! V-carved from a free file on another site.
|
|
3
|
263
|
December 11, 2018
|
|
So in between breaking stuff,
|
|
9
|
828
|
December 11, 2018
|
|
I decided to go back and do some paint on this fellow.
|
|
0
|
235
|
December 9, 2018
|
|
Hello. First time poster here and new to the OX CNC experience.
|
|
7
|
353
|
December 8, 2018
|
|
I have read about up cut and down cut router bits on different forums,
|
|
20
|
476
|
December 8, 2018
|
|
I’d like to carve some curved (2.5D) letters on a work piece.
|
|
1
|
242
|
November 18, 2018
|
|
Just FYI, I’m using the standard mounting plates from the parts library and I’m
|
|
3
|
302
|
November 18, 2018
|
|
If you are looking to replace your controller, or are just building your machine,
|
|
0
|
241
|
November 14, 2018
|
|
Not perfect, but I am happy with it. 9"x12"x1" laminated Oak.
|
|
10
|
351
|
November 11, 2018
|
|
Well, it's been a while since I posted anything new.
|
|
5
|
386
|
October 24, 2018
|
|
Need some help with Novusun NVUM CNC Controller and Mach3.
|
|
23
|
6604
|
October 18, 2018
|
|
FYI & update on my attempt at a new spindle driver design.
|
|
4
|
246
|
October 17, 2018
|
|
Just ran into this problem as well.
|
|
2
|
188
|
October 14, 2018
|
|
Post shared in communities I'm member of.
|
|
15
|
181
|
October 10, 2018
|
|
New to the group - joined to ask / get experiences with the following
|
|
10
|
515
|
October 6, 2018
|
|
Thanks again for your help Brandon, got the gcode issue fixed.
|
|
11
|
2815
|
October 4, 2018
|
|
Originally shared by James Rivera Ok,
|
|
50
|
1074
|
October 3, 2018
|
|
Brandon, Got the Post Processor corrected, I have tried both mm and in.
|
|
1
|
176
|
September 28, 2018
|
|
Another carving finished up this weekend. I guess I like dragons.
|
|
5
|
276
|
September 24, 2018
|
|
Hey Facebook users, there is a new group started over there.
|
|
1
|
155
|
September 24, 2018
|
|
Need to do a tiny bit of touch up sanding
|
|
13
|
334
|
September 20, 2018
|
|
Sneak peak. Just a simple one for a change of pace.
|
|
3
|
315
|
September 20, 2018
|
|
Had a slight mishap sometime during the 20 minutes I quit watching the machine,
|
|
6
|
425
|
September 19, 2018
|
|
Another project finished. Just a v-carving from some clipart.
|
|
6
|
306
|
September 18, 2018
|
|
Hello all! Great stuff you all have going on here.
|
|
6
|
177
|
September 11, 2018
|
|
I was missing something on my spoiler board, so.....
|
|
3
|
318
|
September 9, 2018
|
|
I have completed the mechanical build and now having trouble with the electronics.
|
|
1
|
245
|
September 3, 2018
|
|
I am trying to set up a laser on my OX,
|
|
2
|
475
|
September 3, 2018
|