These are the TMC2130 that come without headers.
|
|
7
|
159
|
December 28, 2017
|
Is there any difference between ordering the TMC2208 SilentStepStick boards from Digikey versus ordering
|
|
3
|
181
|
December 23, 2017
|
I have the prusa i3 and one of the motors stop working,
|
|
4
|
146
|
December 22, 2017
|
Originally shared by Frank Herrmann That's my new Series "Frank's Mailbag",
|
|
0
|
110
|
December 17, 2017
|
Need help identifying this board.
|
|
3
|
126
|
December 14, 2017
|
Originally shared by Thomas Sanladerer So far,
|
|
0
|
139
|
December 10, 2017
|
OMG, a beautiful purple from OSH Park waiting on my desk when I arrived
|
|
18
|
271
|
November 30, 2017
|
Had some time to solder up a Revolve board over the weekend.
|
|
6
|
156
|
November 30, 2017
|
UPS 5V for embedded applications. One battery 18650.
|
|
2
|
192
|
November 29, 2017
|
I went to China last week to check up on Manga Screen 2 manufacturers,
|
|
19
|
167
|
November 27, 2017
|
Looking for a core xy, with a 300*300*300 vol, for around $400 CAD.
|
|
17
|
1385
|
November 26, 2017
|
Has anyone changed the board in a CR10 to a Mini Rambo?
|
|
0
|
230
|
November 4, 2017
|
Replaced my servo-deployed microswitch z-probe with a BLTouch on my OrdBot.
|
|
5
|
274
|
October 15, 2017
|
This is the helmet for a baikers group! The resolution is: Nozzle:
|
|
10
|
159
|
October 11, 2017
|
Hi, typically the printer that use 2 motors for drive Z axis are connected
|
|
10
|
232
|
October 1, 2017
|
Another short work involving some rapid 3D model to help design a tray for
|
|
1
|
197
|
September 10, 2017
|
I want to be able to adjust my z-offset with software,
|
|
6
|
2742
|
August 23, 2017
|
For those interested, 3D Scanner HAT for the Raspberry Pi are available through Tindie.
|
|
3
|
727
|
July 17, 2017
|
Does anyone have experience with the minitronics or megatronics from reprapworld?
|
|
6
|
197
|
July 5, 2017
|
Kasun chanaka guruge with 3d printer
|
|
2
|
143
|
July 2, 2017
|
Ok so hopefully (fingers crossed) my first 3d printer is due in the next
|
|
3
|
132
|
June 29, 2017
|
I need some help.
|
|
9
|
135
|
June 20, 2017
|
Hey guys, any printer recommendations for about $500 and under?
|
|
1
|
121
|
May 25, 2017
|
I'm having a major issue updating the firmware on the melzi board on my
|
|
1
|
151
|
May 15, 2017
|
Autodrop3d Kickstarter to automatically cycle prints from a queue
|
|
2
|
149
|
May 11, 2017
|
Designed a MITS Altair 8800,
|
|
4
|
599
|
April 15, 2017
|
Has anyone considered using one of these circuits in 3D printing? Just curious.
|
|
15
|
163
|
April 10, 2017
|
While I have some new boards coming in in a few weeks,
|
|
12
|
123
|
April 5, 2017
|
3D Printing a Reconstructed 3D model.
|
|
1
|
134
|
March 25, 2017
|
I got the new Printrboard G2 installed on my 2013 Simple Metal today.
|
|
15
|
789
|
March 17, 2017
|