Does anyone have experience with the minitronics or megatronics from reprapworld? I suppose it carries DRV 8825 but can´t find any Info on the stepperdrivers used on the board.
I use a megatronics in my Kossel XL for 2 years now. It’s a very good board. It doesn’t have any stepper drivers on board. You can use any stepper driver that is polulu compatible. I personally use the DRV8825
@Thomas_Herrmann have a look at http://reprapworld.com you can find very detailed information about their boards on their website http://world.com - Your browser does not appear to support frames. However, you can …
I already had a look at their page but didn´t found information on the stepper drivers on the mini.
The minitronics has 1/32 stepper drivers so chances are big that they are DRV8825 drivers
