|
Hello Everyone, my name is Alex, new here.
|
|
1
|
417
|
October 6, 2018
|
|
Hi all, new here.
|
|
49
|
753
|
July 17, 2018
|
|
I was able to take a second, very short, test run today.
|
|
1
|
175
|
December 12, 2017
|
|
This is a post I'm waiting to do for a VERY long time.....
|
|
22
|
373
|
October 23, 2017
|
|
Would the below 3D-printed wheel fit on a 1/8 scale slash?
|
|
0
|
183
|
October 13, 2017
|
|
Hi, I made this gimbal for me and all people that want play and
|
|
1
|
166
|
September 2, 2017
|
|
3D printed gearbox - testing for RC car. i waiting for parts from Ebay....
|
|
0
|
166
|
April 26, 2017
|
|
http://www.thingiverse.com/thing:1502019 Combined the hub and axle into a single piece.
|
|
4
|
367
|
February 4, 2017
|
|
http://www.thingiverse.com/thing:2021996 Updated the axle output shafts using 1mm pins, much,
|
|
1
|
188
|
February 1, 2017
|
|
Google+ post by André Roy on 2016-12-04 02:56:40 UTC
|
|
1
|
174
|
December 9, 2016
|
|
Originally shared by Michael G Modified the front spoiler mount with a flexible part
|
|
0
|
214
|
October 17, 2016
|
|
I roughly sketched in some mounts for the landing gear.
|
|
1
|
182
|
October 13, 2016
|
|
I drew in the landing gear and manually changed it's position so it's approximately
|
|
1
|
218
|
October 5, 2016
|
|
Originally shared by Brook Drumm The Printrbot Hughes H1 Racer designed by Andre Roy
|
|
1
|
499
|
October 1, 2016
|
|
Google+ post by Mechanical Engineering on 2016-09-30 17:01:50 UTC
|
|
0
|
149
|
September 30, 2016
|
|
As a few of you have seen over at Facebook,
|
|
8
|
257
|
September 30, 2016
|
|
Continuing to forge ahead, one foot in front of the other.
|
|
7
|
405
|
August 25, 2016
|
|
The Hughes H-1 Racer
|
|
2
|
222
|
August 16, 2016
|
|
Completed a first stab at designing the wing spar (shown solid in the attached
|
|
1
|
392
|
July 19, 2016
|
|
http://a360.co/1QoKKpV A sketch of how we're planning on transferring the wing spar loads to
|
|
28
|
634
|
July 14, 2016
|
|
I was having some trouble with the steering block arm that kept breaking when
|
|
2
|
165
|
June 29, 2016
|
|
The H-1 project team had a meeting and worked out an idea for printing
|
|
10
|
228
|
June 25, 2016
|
|
Sketching out an idea for framing. It revolves around the idea that the fuselage
|
|
11
|
676
|
May 18, 2016
|
|
Hopefully I can spend more time on this =).
|
|
2
|
174
|
April 27, 2016
|
|
So switching to rubber tires from NinjaFlex has pushed the stress from driving spiritedly
|
|
3
|
205
|
April 25, 2016
|
|
Lose two more bolts/nuts from the assembly and reduce the parts to print count
|
|
0
|
188
|
April 20, 2016
|
|
Hey Brook Drumm , I'm thinking of cutting out the inside of the fuselage
|
|
6
|
205
|
April 16, 2016
|
|
We now have ailerons, rudders and elevators.
|
|
1
|
189
|
April 11, 2016
|
|
Stream Slight mod to F1 pinion gear.
|
|
0
|
486
|
April 9, 2016
|
|
The H-1 gets ailerons. Next rudders and elevators, retractable landing gear,
|
|
5
|
215
|
April 7, 2016
|