|
Coming along! now the big wait on axles and parts
|
|
3
|
457
|
January 6, 2019
|
|
Aftermath of first solo drive by my son! He was a little upset with
|
|
0
|
476
|
December 26, 2018
|
|
Google+ post by Engineering Nonsense on 2018-12-01 16:50:44 UTC
|
|
0
|
314
|
December 1, 2018
|
|
Here´s some more flying with the OpenRC FPV Mini Quad:
|
|
0
|
395
|
November 28, 2018
|
|
If you´ve missed it,
|
|
0
|
273
|
September 16, 2018
|
|
https://www.youmagine.com/designs/3d-printed-jet-boat-v2 Fully 3D printed including impeller and jet drive unit.
|
|
6
|
1929
|
September 13, 2018
|
|
Check out my newest creation!! Please share your thoughts with me.
|
|
5
|
268
|
September 13, 2018
|
|
Did some flying with the OpenRC Mini Quad at the local ski slope.
|
|
1
|
301
|
September 10, 2018
|
|
Well it's almost done.
|
|
3
|
207
|
August 18, 2018
|
|
More OpenRC Mini Quad flying:
|
|
3
|
228
|
August 17, 2018
|
|
Trying to get smoother video with the Mini Quad combined with a GoPro Hero
|
|
0
|
186
|
August 16, 2018
|
|
The OpenRC F1 have been downloaded more than 100.000 times from Thingiverse and to
|
|
0
|
306
|
August 14, 2018
|
|
Engineering Nonsense You might like this community for this project. Nice on-the-fly-RC build.
|
|
1
|
200
|
June 25, 2018
|
|
thank you Claus Jander for testing
|
|
5
|
252
|
June 8, 2018
|
|
The dust after MRRF 2018,
|
|
0
|
189
|
May 30, 2018
|
|
Google+ post by Josef Vladík on 2018-05-24 11:46:03 UTC
|
|
2
|
221
|
May 25, 2018
|
|
All done,she runs good.......
|
|
2
|
175
|
May 22, 2018
|
|
It's been a long road,but finally the perfect build in my opinion......
|
|
2
|
163
|
May 19, 2018
|
|
I made this video mainly to get a feel for editing in Premiere Pro
|
|
0
|
201
|
May 8, 2018
|
|
Made some long lasting changes I ran it hard and broke pretty much the
|
|
0
|
157
|
May 7, 2018
|
|
Google+ post by 2nd amendment Infringed` on 2018-04-04 00:55:36 UTC
|
|
12
|
280
|
April 25, 2018
|
|
Crash-safe version? most parts printed in my special flexible filamaments.
|
|
6
|
204
|
April 17, 2018
|
|
Come and see these in my booth at https://3dmeetup.se/event-2018/ Thanks Emanuel Teljemo! looking great
|
|
0
|
170
|
April 8, 2018
|
|
looking so nice Barry!
|
|
0
|
160
|
April 7, 2018
|
|
True rubber, good for some surfaces...
|
|
1
|
193
|
April 7, 2018
|
|
New version of the OpenRC F1 Crash Safe Front Spoiler.
|
|
0
|
193
|
April 7, 2018
|
|
Well got the chassis printed out.
|
|
0
|
201
|
April 4, 2018
|
|
So Im trying this new approach, Design a million times, print once ahah,
|
|
11
|
207
|
April 3, 2018
|
|
Rims for the F104 tires (original/2017/diff in 3 different spoke designs)
|
|
4
|
226
|
April 2, 2018
|
|
My third time building the Truggy. So much fun to see it come together.
|
|
5
|
373
|
March 31, 2018
|