Crash-safe version? most parts printed in my special flexible filamaments.

Archive OpenRC
,
1

Crash-safe version? most parts printed in my special flexible filamaments. Emanuel Teljemo printed the flexible parts & Daniel Norée has printed the PLA parts, thanks!!! https://www.thingiverse.com/thing:1884110 https://www.thingiverse.com/thing:1968442 https://www.thingiverse.com/thing:2822107
I did buy the electronics now and hope to get the time to get it up and running soon…

4051a98282705eed5300c790019c8d67.jpeg
4051a98282705eed5300c790019c8d67.jpeg3264×2448 3.09 MB

7ed29297d62be02b28596a33b60d85ca.jpeg
7ed29297d62be02b28596a33b60d85ca.jpeg3264×2448 1.39 MB

2

What flexible filaments are you using, if I might ask?

3

@Nate_T https://www.creativetools.se/palmiga

4

Looks interesting. A flexible filament that’s electrically conductive? Wild. I can imagine some interesting possibilities. Is there a US distributor? Any way to get samples?

And what temps do you normally run on the extruder and the bed? Do you need a direct drive extruder, like ninjaflex?

5

:slight_smile: @Nate_T bowden is not optimal for flex… 220-230 deg. CT is shipping to US (no US reseller right now). Cold bed is ok or 50 deg C if preferred for thick/big parts

6

I guess I need to get my direct setup working again. Do you know about how long it takes to ship to the US?

7

sorry dont know that, sometimes the customs are a bit slow @Nate_T