Yuusuf Sallahuddin ...here you go....3d laser cut...there is a store here that sells these.

@Yuusuf_Sallahuddin_Y …here you go…3d laser cut…there is a store here that sells these.

That’s pretty cool. Looks very christmassy.

@Yuusuf_Sallahuddin_Y …we are in Helen Georgia…it’s an Alpine modeled town in the mountains…lots of arts and crafts shops here.

@Scott_Thorne Spent 18 years in Dunwoody GA a few hundred yards off the Chattahoochee river.

@HalfNormal …I’m looking at the hooch right now brother…love it here…I live in Newnan Ga…where are you now?

@Scott_Thorne ​ Born and raised in Phoenix Az. Moved to Ga in 1983. Now live in Flagstaff Az.

I travel to Phoenix around 3 times a year…my company sends me there to do work at one of our plants off of the 10 and 51st…small world…lol

Here’s the local competition, laser cut scenery and models for war gaming. Some absolutely crazy stuff done in MDF


Check this one out for instance, in 3mm MDF: http://bit.ly/1oGSJ8k

@I_Laser …absolutely amazing…my problem is learning the drawing software…once I learn that…there’s no stopping me.

@Scott_Thorne I know the drawing software. My problem is a lack of artistic skill… :stuck_out_tongue:

Though after seeing Yuusef’s creation, I have the bug now and am going to try making something.

@I_Laser …I’m just the opposite…I have the skills…I just don’t know how to draw them up…lol…I’ll be home tomorrow I’m gonna give it a shot.

@I_Laser Wow, that is absolutely hectic those miniature wargame models.

Fortunately for me I am both artistic/creative & have the skills to draw things up in computer software. Except 3D software currently. I always hated 3D drawing on PC. Also don’t ask me to add colour to anything. I am horrible at choosing colour/mixing them.

I’m looking forward to see what you create also.

@Scott_Thorne What software do you use for drawing?

@Yuusuf_Sallahuddin_Y …corel x7…inkscape.

@Scott_Thorne Aside from using the CorelLaser/CorelDraw12, I haven’t used CorelDraw since I was about 15. Also, haven’t really had much use of Inkscape as yet either. Might have to give Inkscape a go & have a trial of Corel x7-8 sometime in near future.

@Yuusuf_Sallahuddin_Y …I’m new to these drawing programs…I’ve never had a need to use them until now…I watch a lot of YouTube tutorials…but I’ll get the hang of it.

@Scott_Thorne Here’s a good guide for Inkscape http://tavmjong.free.fr/INKSCAPE/MANUAL/html/
It’s quite a powerful piece of software!
I love the laser cut architecture! I going to have to try to make some myself!

@Scott_Thorne Great work Bro

@Ulf_Stahmer Good info

@Yuusuf_Sallahuddin_Y You produce nice things already

@ED_Carty …these pieces aren’t my work…I saw them at a store…I only took the photo because we were talking about 3d objects made with the laser cutter…I wish I could make something like that…lol