This 3D-printed dragon combines over 250 individually printed pieces:

gplus
discussion
(Microchip Makes) #1

This 3D-printed dragon combines over 250 individually printed pieces: http://buzz.mw/bp9qz_l

#Atmel #3DThursday #3DPrinting #3DPrinted #DIY #Makers (via @3dprinting.com )

(Kurt Wendt) #2

Thanks for posting that here! Yup - that was a pretty darned big project of mine.

(Jim Wilson) #3

Consummate Vs! CONSUMMATE!

(Kurt Wendt) #4

@Jim_Wilson
:slight_smile: