I have a 50w k40 laser. I send work to the laser, the head starts to move, but the laser fires for a point at first, then goes out. When I open the cap of the tube and look closely, I see that the laser tube is blinking weakly dozens of times per second. But it does not burn the wood in the work area. Video link: https://youtu.be/rwpj0vBxjlA
When the laser is on but there is no work, a slight clicking sound comes from the power unit 2-3 times per second. Video link: https://youtu.be/HjQCo0nMSm4
The green led on the power unit is on, it fires for a short time when I press the test button.
How can ı solve it?