Thanks to a slim new PSU my i2 is now totally portable,

Bracken_Dawson · April 4, 2013, 9:16pm

Thanks to a slim new PSU my i2 is now totally portable, just add power and netbook. It’s also very heavy.

Next job is to re-wire the whole thing using mechanical endstops and much much thinner wire. Probably fit a plug to the extruder umbilical too.

Ricardo_Rodrigues1 · April 5, 2013, 1:22am

Good stuff, man. What kinda nozzle does that carry?

Anthony_White · April 5, 2013, 2:03am

add a raspberry pi as a print controller, it’ll be a bit less weight to carry

alain_frenois · April 5, 2013, 6:12am

superbe réalisation super top

Bruno_Pettorelli · April 5, 2013, 7:47am

you did a great job

Bracken_Dawson · April 5, 2013, 8:45am

@Ricardo_Rodrigues1 .35m J head.

ThantiK · April 5, 2013, 12:19pm

HAH! This is a lot like how I had mine set up. very nice work. And yeah, they can get awfully heavy. I was lucky because I have a SSR-powered heatbed, so I didn’t have the 10A current draw to deal with, allowing me a much smaller power supply. I’m loving the way you did the filament spool mount - something mine lacked.