I will test it tomorrow !
It’s now unplugged, tommorow should be fully discharged !
tested this morning:
- S2 switch is not there
- no short between capacitors and diode bridge (seems to be 220V device)
I have also tested all the diodes bridges : they are fine
I have even re tested the PSU with a new power cord… same thing of course!
So now I will probably buy a new one. Any advice between all the models ?
I would look for the lowest-price supply that has the same connector style making the installation easy.
2 Likes
I received my new laser PSU this morning.
I ordered the “white connectors” model but received the “green connectors” one…
Of course delivered without any documentation and connectors not labelled…
Have to find how they connect on @donkjr’s blog !
Found this wiring on Don’s blog :
I have just added the 5V output on the right most connector (was missing on the drawing). Hope I am right !
I can’t help thinking that these lasers are “impressive”.
First test : manual trigger of the beam → it works !
Very good day today:
I have performed mirrors alignment. And so here is the very first cut on a piece of paper !
Needless to say that I am very very happy !
Thanks for your help during this project (special thanks for @donkjr and his blog)
2 Likes