Recently built v2 of my moire illusion.

3D Printing
,
1

Recently built v2 of my moire illusion.

This one is easier to print and assemble - full design at:
https://cad.onshape.com/documents/d70a624518d3317b33e3a07e/w/4ce113ca926337e6b1940d36/e/7d9a137e3dd975492c30c089

I’m currently using the following motors with this, but am not happy:
https://www.ebay.co.uk/itm/2X-12V-DC-3-RPM-Motoriduttore-Momento-Torcente-Alto-Velocita-Rotazione-Motore-TD-/302900565555?hash=item468647d633

The motors are not strong enough and I’ve been searching for some other option to replace them. Any suggestions would be more than welcome.

Thanks.

9d58f407ccb67dafa0e9faea3ab0d6dc.jpeg
9d58f407ccb67dafa0e9faea3ab0d6dc.jpeg1080×1920 199 KB

2

Most wonderful

3

@Nagabhushana_Rao_N Thank you

4

I need one of these.

5

@Robert_Rapplean The design files are in the description - if you have access to a 3D printer - it’s easy.

6

I do have one, thank you.