I got nice set of monster truck tires but turned out they require rims

[Szymon_Kobalczyk]

I got nice set of monster truck tires but turned out they require rims where hub is at the bottom because the C-Hub doesn’t fit inside the rim. Later I discovered that they will interfere with wishbones on front wheels while turning.

So today I played with Openscad files from @Bracken_Dawson and created my own design.

[Bracken_Dawson]

Neat! I found that deep dish rims rely on good layer bonding that I could never achieve, If you smash the front off, try building the spokes right out to the face.