I developed a few 3d printable ESP8266 cases,

Electronics
, ,
1

I developed a few 3d printable ESP8266 cases, mainly for Wemos D1 Mini with/without additional OLED 128x64, with reset button support:

Wemos D1 Mini: https://www.thingiverse.com/thing:2847539
Wemos D1 Mini with OLED layered: https://www.thingiverse.com/thing:2853148
Wemos D1 Mini with OLED side-by-side: https://www.thingiverse.com/thing:2853149
Wemos D1 OLED aka ESP12F OLED (same PCB): https://www.thingiverse.com/thing:2853146

2

Thanks !