Hi! I have a problem with the stearing servo.

Archive OpenRC
,
1

Hi! I have a problem with the stearing servo.

I’ve followed the build videos of @Daniel_Noree ​ and in this video it’s kindy difficult to see how the parts are supose to be connected together.

It’s the servo mounted right? It’s a micro servo tower 9g. Maybe it’s too big for there?

Also, I’m wondering what kind of material are you using for connect the servo and the servo saver.

Thanks!

4306e926de864e52e1c2f32360b9f259.jpeg
4306e926de864e52e1c2f32360b9f259.jpeg4640×2610 2.76 MB

03bfc78c31d348dad9112cfd3a6096be.jpeg
03bfc78c31d348dad9112cfd3a6096be.jpeg4640×2610 2.81 MB

2

Turn the servo holder around 180 degrees.

3

@Daniel_Noree thanks!

4

@Luis_Diaz Let us know how it works out! =)

5

@Daniel_Noree sure :slight_smile:

6

@Daniel_Noree it worked pretty well! thanks! I can’t wait to have it finished :slight_smile:

7

@Luis_Diaz Good to hear, looking forward to seeing some pictures later

8

Here is the picture of the servo properly mounted. I’m going to install the link tomorrow :slight_smile:

eebb6d4e41e3d0a726e19273dab24f5c.jpeg
eebb6d4e41e3d0a726e19273dab24f5c.jpeg2048×1152 156 KB