Google+ post by Tim Rastall on 2013-08-10 11:16:57 UTC

3D Printing
,
1

Progress, Woot.

cf08bac1e6f04fdca2b10b62a8f88ef4.jpeg
cf08bac1e6f04fdca2b10b62a8f88ef4.jpeg2048×1536 478 KB

a76a8604ebaff751945ebf0a7723aa23.jpeg
a76a8604ebaff751945ebf0a7723aa23.jpeg2048×1536 477 KB

1a68f75dbe6fd605fba85063e31bea8d.jpeg
1a68f75dbe6fd605fba85063e31bea8d.jpeg2048×1536 415 KB

657565fca3a8d95d0e62975da7a61354.jpeg
657565fca3a8d95d0e62975da7a61354.jpeg2048×1536 425 KB

2

Thanks to @Vik_Olliver for the pretty blue ABS, although I thnik ‘Plumbers Tape Blue’ is closer than Sky Blue :slight_smile:

3

Exciting! It looks great!

I’m was just looking at the T-slot Tantallus the other day. By placing the motors outside the frame it seems that it’d be easier to put on panels and thus creating a heated chamber without having the motors inside the chamber in the raised temperature. Have you had any thoughts about that?

4

I call that color @FamiLAB blue.