+Alex Lee I’m looking at using the stuff from the badly made Cobblebot Basic to upgrade to a Talos… The bed is 15x15 on the Cobble Basic. Are you willing to help me make everything “fit” ? And even make a “Cobble Basic Upgrade Kit” (aka : Kit that will actually make it work).
Can you list or take dimensions and pictures? I can help you see what can be reused and what parts would require modification.
@Sebastien_Plante That would be really interesting. Seems like you should be able to reuse most of the parts from your current printer.
Is there a BOM for this printer anywhere?
Seb and me own a cobblebot.
i made a BOM based on the manual.
i tink i can post the link for the manual to
https://store.cobblebot.com/downloadable/download/sample/sample_id/3/
Thanks for your help!
@Eclsnowman @Alex_Lee , As you can see, @Richard1 posted the BOM. The printer is supposed to look like this ( http://wyattharris.com/cbot/assemblecbot2.jpg ), but with many flaw IMO.
I’m also looking at a CoreXY model based on that http://www.makerstore.com.au/product/corexy-kit-500mm/