A massive 40-hour print of a Saber Toothed Cat, Smilodon fatalis.

3D Printing
,
1

A massive 40-hour print of a Saber Toothed Cat, Smilodon fatalis. The final print measures 12" from base of skull to tip of jaw and was printed in Gold PLA from SeeMeCNC. I ended up printing this in four pieces so I could fit it on my printer and I glued it together with super glue.

349e3dfcaf09b23625ba069a6421d21b.jpeg
349e3dfcaf09b23625ba069a6421d21b.jpeg4128×3096 1.79 MB

182fdc1fd548714a22dd377850075ca5.jpeg
182fdc1fd548714a22dd377850075ca5.jpeg4128×3096 1.75 MB

640e3b2d8c462df387b1d4c8a2b112ce.jpeg
640e3b2d8c462df387b1d4c8a2b112ce.jpeg4128×3096 1.92 MB

bf08e4341fb87be414eb7bfa9f9caccd.jpeg
bf08e4341fb87be414eb7bfa9f9caccd.jpeg4128×3096 1.98 MB

efe7f839bfc53774f56966ff0622146e.jpeg
efe7f839bfc53774f56966ff0622146e.jpeg4128×3096 1.54 MB

c3c17f5411d6636ba1edd6fc01bab10b.jpeg
c3c17f5411d6636ba1edd6fc01bab10b.jpeg4128×3096 1.78 MB

2

Wow. That’s a VERY nice looking print.

3

I like the banana for scale

4

Is this the same one they had on Thingiverse? http://www.thingiverse.com/thing:472463

5

Yep, except I scaled it 2.5x.

6

Put a Sloths next to it…and a Mammoth!

7

Well I have a mammoth skull stl…but don’t have a sloth one. Do you have a link?

8

@Shane_Graber
Here is the one we built for the store: https://lh3.googleusercontent.com/-EsTR4cwuNDQ/VCrjN_aBupI/AAAAAAAAAOA/aID9_TjZbOc/w533-h400/IMGP56321024.jpg

9

Beautiful. What 3D machine do you use?

10

@Thomas_Chandra We used a Makerbot Rep 2 on the one we built, but we could have a made a HUGE one on one of our Lulzbots. We used warm gray for the skull and khaki for the teeth.