Very first  print! Originally shared by Jason Smith (Birds Of Paradise FPV)

Very first #Eustathios print!

Originally shared by Jason Smith (Birds Of Paradise FPV)

Looks great for a first print. What are the vital stats? layer height, speed and acceleration, etc.

Layer Height = .1mm
Speed = 60mm/s
Acceleration = 3000 m/s^2
Material = PLA
Temp = 220 C

My ultimaker did not print this well for the first print. That is awesome.

I posted on the public link for this already. But I am pumped to build it. I am about 50% done with the printed parts, and all the misumi parts are on the way. Just need to order the sdp-si bits and decide on my electronics.

Very nice Jason. I know you revised many of the parts to suit your purposes but I still get a kick out of seeing another bot working that in some way was derived from mine :).

@Tim_Rastall agree.