Took awhile to run...

Took awhile to run… but it turned out pretty good :slight_smile: #laserweb #yearofthelaser

Nice work. Is this the million lines of gcode job?

Yep :slight_smile:

Very nice work!

.1 dot size 400light 200dark on 1/4" maple ply 4-5mm closer to the laser out of focus

Forgot to mention… single pin pwm setup max Potentiometer output set to 12ma: laserweb power settings 1-99%

@Ariel_Yahni_UniKpty ​ ^^^

Nice job. Looks fantastic.