Thought I'd share my latest build. Cnc router.

CAD & CAM Tool Chain LaserWeb/CNCWeb
,
1

Thought I’d share my latest build. Cnc router. Still lots to do!

0c7e4182fbcef89c10faea7d41ca14e1.jpeg
0c7e4182fbcef89c10faea7d41ca14e1.jpeg5312×2988 4.43 MB

0a9f444620151cb60dfb7b45af766e1e.jpeg
0a9f444620151cb60dfb7b45af766e1e.jpeg5312×2988 4.66 MB

2

Nice. Any particular build you are following?

3

@Ariel_Yahni_UniKpty ​, my own design inspired by prior builds I’ve seen online and a budget.

4

Leadscrew formalmente axis?

5

Yes lead screw, 3 axis for now. Everything was purchased from eBay ,McMaster Carr and Amazon. Of course I will run smoothie. I hope to have the base built this week. The electronics will almost exactly mimic my laser setup. The spindle might be a bit undersized but should work for most things I’ll do on it. I also 3d printer the stepper motor spacers. I’m not sure if they’ll hold up but for now they’ll work.