This tutorial describes how to use MQTT with ESP8266 to send data to an

Electronics
, ,
1

This tutorial describes how to use MQTT with ESP8266 to send data to an IoT platform. It covers all the steps to enable MQTT on ESP #tutorial

11ec9c7653d7705a42aebae73444ef38.png
11ec9c7653d7705a42aebae73444ef38.png953×310 8.06 KB

2

Nice platform! I was able to connect almost immediately. But then I ran into incompatibilities, as I was unable to add an actuator -> light - it did not recognized my board, it seems.