The RepRapPro Huxley building instructions are really painful.  http://reprap.org/wiki/RepRapPro_Huxley The part lists are different

The RepRapPro Huxley building instructions are really painful.

http://reprap.org/wiki/RepRapPro_Huxley

The part lists are different from the referring part list photos, some of the screws from the list are never mentioned in the text and some mentioned screws are missing in the kit (well, this could be a shipping error). The hot end assembly e.g. leaves us with some screws never used and a nice sentence about two screws that should have been mentioned before but are not: http://reprap.org/wiki/RepRapPro_Huxley_hot_end_assembly

It will be a miracle if we get this working in the end.

I assembled it few months ago and I had same problems. I got some help at their IRC channel/forum and rest was solved after some reflection. I can also help if they didn’t change the kit too much in the meantime. Problem seems to be that kit changed over time but some instructions and pictures didn’t follow.

@Toma_Roncevic Thank you very much for your offer. I’m at the wiring point and try again on Tuesday. I’ll ask when I cannot figure it out. It’s a shame you had these same problems months ago and they didn’t change their wiki. It’s disappointing. I’ve seen way better instructions for electronic kits and similar stuff on the web.