So I’m ready to test cut after about a week of fiddling around with a sharpie on the end of my z axis. All went well. Now I’ve got my spindle in position and I did a test cut with the chilipeppr logo. It cut in reverse, or mirrored the image so that it’s backwards… Any suggestions on how to reset that?
You didn’t post a picture so we don’t know what axis it’s mirrored on, but reverse the polarity of that axis’s motor.
It’s mirrored on the x axis. I can’t really get a good pic because the cut depth is very shallow, basically engraving. I’ll try to reverse po on that and see what I get. Thanks again for lending a hand and thought.