SMW3D / Hobby-Fab All-in-one controller

General CNC CNC Routers
1

If you have the pro-controller it will likely have the MakerBase MKS DLC v2.0 controller board. Documentation is scarce on this controller but I was able to get a response from MakerBase support and have posted the main archive on dropbox.

If you use these files, you do so at your own risk. I have repackaged them removing .rar files and making a single folder with everything I received from MakerBase support. I have done my best with the Antivirus tools I have but you just never know these days.

3 Likes
2

@Brandon_Satterfield — do you know whether the “12V” input can actually take 24V?

3

The stepper sticks can. The board doesn’t need any power except USB.

1 Like
4

I used the grbl600.zip that @Eclsnowman linked to at

I successfully uploaded to it as an “Arduino Uno” (since it has a 328P chip on it), but I note that I got a warning:

Low memory available, stability problems may occur.

Hopefully it’s OK. It seems to work fine now driving the LV8727s.

5

Totally normal.

1 Like
6

9 posts were split to a new topic: MKS DLC v2.0 controllers not working consistently