Sharing here ;) http://communities.fabcreator.com/t/the-swiss-fabkit/36/22 Originally shared by Maxime Favre Setup of the fabkit:

Lasers
,
1

Sharing here :wink:
http://communities.fabcreator.com/t/the-swiss-fabkit/36/22

Originally shared by Maxime Favre

Setup of the fabkit:

  • chiller
  • adding more light inside
  • mirror alignment

858b8b8f3276b73dc746d43411ce37bd.jpeg
858b8b8f3276b73dc746d43411ce37bd.jpeg2080×1560 247 KB

ebdf06c57e5301e7cd13371fe60aefe4.jpeg
ebdf06c57e5301e7cd13371fe60aefe4.jpeg2080×1560 295 KB

89cc6da537669e263684a4c1b68cb47b.jpeg
89cc6da537669e263684a4c1b68cb47b.jpeg2080×1560 169 KB

6558377c335950c46f59ee114de65990.jpeg
6558377c335950c46f59ee114de65990.jpeg2080×1560 269 KB

af13283d68bf6d967ecee05f8605c949.jpeg
af13283d68bf6d967ecee05f8605c949.jpeg2080×1560 351 KB

41092465f2183afd671ecc89dd73edac.jpeg
41092465f2183afd671ecc89dd73edac.jpeg2080×1560 201 KB

58ff02c8a1b685be27e10fa15e7db8b4.jpeg
58ff02c8a1b685be27e10fa15e7db8b4.jpeg2080×1560 218 KB

2

At least your lights work! I seem to have a bad contact or something! Still gottat take the multi-meter to the shed, but all the bisuiness travel ain’t helping much!
Looking good tho!

3

Check the connector on the end off the strip. It’s a bit loose and you can easily have a bad contact. I had to play with a plier on mine

4

I know… Just haven’t had the time yet, and with business travel every week, my time at home is both limited and precious…