Printed my buddy's raptor model by splicing it into three parts + a hat.

3D Printing
,
1

Printed my buddy’s raptor model by splicing it into three parts + a hat. Printed at .2mm on a bukobot mini 1.75mm mod.

740df7294148104f96cc6acf8caa4b19.jpeg
740df7294148104f96cc6acf8caa4b19.jpeg1944×2592 1.52 MB

a608a78ce9875d3a51d8c891babbb6dd.jpeg
a608a78ce9875d3a51d8c891babbb6dd.jpeg2592×1944 1.14 MB

66bdbd124215d6c2567f3249bc3e0272.jpeg
66bdbd124215d6c2567f3249bc3e0272.jpeg2592×1944 1.38 MB

1d63f6f749ed57151742213afc1279c2.jpeg
1d63f6f749ed57151742213afc1279c2.jpeg2592×1944 1.18 MB

f5d26f3bd3fd6f9f68aaeb9c45cab614.jpeg
f5d26f3bd3fd6f9f68aaeb9c45cab614.jpeg2592×1944 1.29 MB

2

Great print! What slicer and support settings did you use?

3

I used Slic3r, with standard support turned on except changed the default separation to 1 mm instead of 2.5 default. One talon didnt make it but otherwise, the print came out great :smiley:

4

Great

5

That looks great. Nicely done.

6

The hat is what really sells it. Nicely done.

7

For anyone curious, here is a timelapse: https://www.youtube.com/watch?v=BVjoFPanQEc&feature=youtube_gdata_player