please, i need tips and tutorials for 3d printing

please, i need tips and tutorials for 3d printing

The best one : google :stuck_out_tongue:
Maybee you can be more specific?? :wink:

thanks


http://garyhodgson.com/reprap/wades-geared-extruder-visual-instructions/

thanks :):slight_smile:

Reprap.org

Hello, and thank you for choosing the automated tip dispenser.
Please select one of the following options :
For tips about building a 3D printer, press #1
For tips about printing on a 3D printer, press #2
For tips about designing 3D printable models, press #3
To talk with an operator, please hold on the line.

and for god shakes don’t press #4

reprap wiki is the 1 to read, when it gets bored, you know you are reaching your goals … if you like reading … else … video tutorials does nothing. you need to open your hands, buy a soldering iron … start with V=IR … then P=IV … then etc etc etc