Originally shared by Thilo Fromm Yoda - our first larger print on my wife's

3D Printing
,
1

Originally shared by Thilo Fromm

Yoda - our first larger print on my wife’s brand new Ultimaker.

We scaled the original model (http://www.thingiverse.com/thing:14104) up a bit; our Yoda is about 100mm high.

I made a timelapse of the printing process (which shows that there’s room for improvement concerning my timelapse shooting capabilities :slight_smile: ): http://www.youtube.com/watch?v=6EkRWP5OAaE

e74c1abba1bdc32f439f3909a491c2b5.jpeg
e74c1abba1bdc32f439f3909a491c2b5.jpeg2048×1536 448 KB

11507d8287d929d3df317bedb9592fc6.jpeg
11507d8287d929d3df317bedb9592fc6.jpeg2048×1536 454 KB

2

Thingiverse link?

3

@Thomas_T_Sorensen Right there in the original post? Did you click on “read more”?

4

Very nice yoda!

5

@Thilo_Fromm Sorry, don’t know how I missed that! Thanks

6

Just printed one myself. In green PLA :slight_smile:

7

@Thomas_T_Sorensen I was thinking about using green/translucent PLA and putting it on a flat LED light or something :slight_smile: