Originally shared by Nicholas Seward Can you bridge like this?

Nicholas_Seward · October 26, 2016, 5:40pm

Originally shared by Nicholas Seward

Can you bridge like this?

I am working on a new bridging algorithm. Here are some manual prototypes. I am super excited by the results. More info here https://github.com/Ultimaker/CuraEngine/issues/50

Jeff_Keegan · October 26, 2016, 6:20pm

Very cool.

Fran_Lozano · October 26, 2016, 6:29pm

Amazing!

Eric_Cha · October 26, 2016, 7:33pm

NICE!

Javier_Prieto · October 26, 2016, 7:43pm

Wuauuuu!!! Will it work for slic3r??? @Griffin_Paquette @Miguel_Angel_Salmero

Nicholas_Seward · October 26, 2016, 7:44pm

@Javier_Prieto It will work for anything someone is willing to port this into. I know it won’t be easy for Cura or Slic3r.

Griffin_Paquette · October 26, 2016, 7:55pm

Don’t have the skills to do it myself but would love to see it for Cura!! Very impressive results

Thank ya for taggin me @Javier_Prieto

Michael_Scheurer · October 27, 2016, 5:29am

print it upside down no problem

Nicholas_Seward · October 27, 2016, 12:57pm

@Michael_Scheurer Ha. I almost designed the test pieces to not work upside down but I opted for simplicity.

Daniel_Farley · November 2, 2016, 7:15am

Can you show the underside, can you get simplify3D to implement it

Nicholas_Seward · November 2, 2016, 7:44am

@Daniel_Farley Check out my feed for more pictures. Regarding simplify3D, they would need to either pay me or do it themselves. (Feel free to encourage them to do either.) I will focus my effort for now on the slicers that are FOSS.