Originally shared by Nathaniel Stenzel This is what it would look like if I

General CNC CNC Routers
,
1

Originally shared by Nathaniel Stenzel

This is what it would look like if I was to use my bucket_mill project to make a budha statue from 3/4 inch thick boards. If does seem like the precut for level 4 was not good enough, but the rest should work beautifully. The toolpath renderings are courtesy of ChiliPeppr.

986a982f67bb88b5ebf74bfd30416113.png

bf1d2066556bcf799ac2bc2f49038c47.png

f02a2964f99e85393743955fce58605f.png

9aaab7d3c0a4ab12bd0829641962a57e.png

7b2d29e9ccd2973e66c212c3201902eb.png
7b2d29e9ccd2973e66c212c3201902eb.png633×537 152 KB

38248628e5e17d70207ff8d4aede3786.png

2442de8940a7400a94321d92f85388dc.png

ebceeb33e1de68bd5a947d0faffd441e.png

2

Love to see the finished product! Very cool.

3

@Colleen_McGuire the funny thing is, I don’t even want to make the final product. I just wanted to do a good demo of my software project.