Originally shared by Mauro Manco (Exilaus) as promise first test  he v2....

3D Printing
,
1

Originally shared by Mauro Manco (Exilaus)

as promise first test #tiny he v2… more simple to make.
and lower cost…today arrives new resitor from Cornard… and work amazing same original alluminum nozzle make from shauki. test manualy with meter of abs and no problem soon on printer.

Ps this are link for resistor no shock for price :D…and wait free shipping and take little stock of this.

http://www.conrad.it/ce/de/product/458948/Hochlast-Widerstand-68-axial-bedrahtet-25-W-VitrOhm-CR254-05T-6R8-1-St/SHOP_AREA_17441

yes…great performance low cost less time.

fee1bbb8a5aa5d6d261effc942b70a7e.jpeg
fee1bbb8a5aa5d6d261effc942b70a7e.jpeg1440×2560 376 KB

9478193bde8f7c00c8bab16a8655a8f6.jpeg
9478193bde8f7c00c8bab16a8655a8f6.jpeg1440×2560 184 KB

679ecc41a3fc398fd51d4966b5ab988e.jpeg
679ecc41a3fc398fd51d4966b5ab988e.jpeg1440×2560 303 KB

a4b81e21655aa64654bcebaeb97fb185.jpeg
a4b81e21655aa64654bcebaeb97fb185.jpeg2988×5312 1.88 MB

2

Why did you put the resistor in parallel with the nozzle? Are you not worried that the wires may interfere with your print?

3

@Wolfgang_Ziegler Only because have just have hole…I re-use shauki’s gift, for learn fine dismount him tinyhe and notice top part are good for test tinyhe v2… :slight_smile: http://2.bp.blogspot.com/-yRnJIgJ5eI8/VZU6k33_skI/AAAAAAAAAvA/nGi7E2SgcTg/s1600/1.png (top part) for this have resistor in parallel…only for spend less time.