Originally shared by Kristian Myklebust Lawn mower start/run handle broken and new reversed engineered

3D Printing
,
1

Originally shared by Kristian Myklebust

Lawn mower start/run handle broken and new reversed engineered on 3D CAD and 3D printed… would have been faster to make a mold from silicone and cast a new one :smiley: but we like a challenge

Edit: got some pictures back from my “customer” with the Lawn Mower :stuck_out_tongue: it works :stuck_out_tongue: no major adjustments needed. must say that i’m impressed by my self. just CAD software… Caliper and reverse engineering…

811d32ce25412e54de73e8c47d08a5bd.jpeg
811d32ce25412e54de73e8c47d08a5bd.jpeg3264×2448 489 KB

a4dca2d067001dc507b7e5b1986aedb1.jpeg
a4dca2d067001dc507b7e5b1986aedb1.jpeg3264×2448 448 KB

b5dcce1a7fb1f128e15d2d2102b4deda.jpeg
b5dcce1a7fb1f128e15d2d2102b4deda.jpeg3264×2448 395 KB

2

How are you.If the handle need to mold and injection molding.Our factory is a good choice.

3

Thanks for the offer but in small scale productions injection molding is more expensive than 3d print. And it is working fine so far

4

Kristian.Oh.Thank you for your reply.Hereafter have any need can contact me anytime.