Originally shared by Joe Mitchell Boat deck model.

3D Printing
,
1

Originally shared by Joe Mitchell

Boat deck model. Laying out the sla prints in preparation for spraying.

2d935cb58cda4e2668fd32b35875036c.jpeg
2d935cb58cda4e2668fd32b35875036c.jpeg5312×2988 3.84 MB

05eb5782b3c8a97443574ba9ced73511.jpeg
05eb5782b3c8a97443574ba9ced73511.jpeg5312×2988 3.69 MB

813eec139271593a770c2b4b9d2ac18b.jpeg
813eec139271593a770c2b4b9d2ac18b.jpeg5312×2988 3.95 MB

afb22696aa5c02c958ba17b40d12eecf.jpeg
afb22696aa5c02c958ba17b40d12eecf.jpeg1440×2560 301 KB

2

What was this printed on?

3

It was done on an Ipro 8000