Originally shared by Bracken Dawson
I finally tamed openscad (and a little inkscape) for my now totally free Tamiya M-03 wheel design. Given up with the Alleycat design as it was depending on layer bonding too much and kept splitting, this OZ WRC design has spokes right up to the face so may prove stronger.
Clicky for a github 3D preview: https://github.com/brackendawson/M-03_wheels/blob/master/M-03_OZ-WRC.stl
Don’t attempt to render unless you have a lot of RAM. I’m still deciding if I want to try and design a monocoque chassis in openscad.
