Not sure if this is the right topic …
I cant get my smoothieware controller to output a 0-5V TTL signal for my laser driver. I’m using an AZSMZ-Mini and pin 1.23 as laser_module_pin.
So the issue is that I’m getting 4.5V at 0% laser power … so I thought inverting the pin would do the trick but then I’m getting 1.15V at 0% power and thats already burning stuff 
Oddly the display always shows S0.8/0%. If I test fire with laserweb the percentage is shown but the S value stays the same.
Am I doing something wrong here? Thanks for the help 
