New thought becoming metal.

General CNC CNC Routers
, ,
1

New thought becoming metal. :slight_smile:

1bac2cfb8b9f30c0d6f75164aec43993.jpeg
1bac2cfb8b9f30c0d6f75164aec43993.jpeg3264×2448 1.61 MB

62cc7d938558fc5ba8c15130790350af.jpeg
62cc7d938558fc5ba8c15130790350af.jpeg3264×2448 2.86 MB

c851caaccf3d2e485d780929a22cd85b.jpeg
c851caaccf3d2e485d780929a22cd85b.jpeg3264×2448 1.39 MB

8838dafdb39b713a0afcc32a41f17090.jpeg
8838dafdb39b713a0afcc32a41f17090.jpeg1920×2560 486 KB

29ef2f30cfdb9a0f0a2b820251199e40.jpeg
29ef2f30cfdb9a0f0a2b820251199e40.jpeg3264×2448 1.12 MB

2

Nice!

3

@Brandon_Satterfield what tool/speed/depth are you using for aluminium?

4

Depending on the endmill and how dull it is.

For a 4mm single flute end mill:
180-110mm/m travel.
5mm/m drive.
.4 DoC.

It’s slow, but I’m not in any hurry, they are my CNC machines. I give instruction, they work. Only if everything in life was so easy!

5

Nice job Brandon, these cuts look amazing!