Nathaniel Stenzel Here are the results.

Lasers
,
1

@NathanielStenzel Here are the results.

And these are my settings:
Picture: 1 w/o Speed Override
Power: 10-30
Pixel Ratio: 0.2mm
Feed: 3000
Rapid Feed: 5000

Picture: 1 WITH Speed Override
Power: 10-20
Pixel Ratio: 0.2mm
Feed: 3000
Rapid Feed: 5000

Black is much better, but still the deep black dots, because laser stops for bit before it change the intensity or something like that. but its getting better thats for sure.

177c21a9a0569bd14e0539a1da86fb1a.jpeg
177c21a9a0569bd14e0539a1da86fb1a.jpeg4160×3120 4.57 MB

71de3f9e4e42a5b39fdf785df7546cf1.jpeg
71de3f9e4e42a5b39fdf785df7546cf1.jpeg4160×3120 4.27 MB

2

I thought @NathanielStenzel ​ was talking about the Calibration widget. I did not test raster itself