Hello, I have an Atomstack A5 (with a retrofitted M50). I ordered with a painter base MKS DLC 32 board. The X axis runs, the Y axis runs and the display runs. Only the module itself does not work. I don’t know how to wire it. On the old mainboard, the interfaces were called Laser and GS. Neither is …

That’s an I2C header for communications with other devices. But in the MKS firmware, the SCL pin is currently configured for a coolant or air-assist relay output using M7 commands. [Hardware Wiring1]

[ - YouTube] Here is a Video, about my Problem

Are you using this M50 adapter board? [image] Atomstack-M50-instructions.pdf 1358.25 KB

Yes, First I used it. Yesterday i thought it doesn’t Work because of this, so I did it Like this: Atomstack Official Laser Engraving User Group Public Group | Facebook (wiring 3)

Because of Method 3 i have a 3 Wire Plug now😁

[image] 3D_Flo: : Atomstack Official Laser Engraving User Group Public Group | Facebook (wiring 3) Sorry, I’m not joining this FB group so I do not know what you are showing me.

That i did yesterday [Screenshot_2022-02-06-15-38-08-024_com.facebook.katana]

So are you fixed and working now??

It’s mit fixer only the Fan works

Maker Forums

MKS DLC 32 with Atomstack

Lasers Solid State Lasers

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled