Making progress on Cayenn devices.

CAD & CAM Tool Chain ChiliPeppr
1

Making progress on Cayenn devices. Have Air Coolant device and Laser 3A device just about done. Can now drag and drop Gcode with active JSON comments into ChiliPeppr and it uploads to all relevant Cayenn devices for full syncing via Coolant pin.

273e624d121b36329775846493e066c7.jpeg
273e624d121b36329775846493e066c7.jpeg2567×1744 912 KB

89b7c01c567421f0cb8c62b5d372c1bf.jpeg
89b7c01c567421f0cb8c62b5d372c1bf.jpeg3264×1836 2.78 MB

68e419eb03e5fc03cded23ad9a6e0f35.png
68e419eb03e5fc03cded23ad9a6e0f35.png710×659 26.6 KB

492b15ae8f5551a45e5189cfa6e57ff6.png
492b15ae8f5551a45e5189cfa6e57ff6.png896×739 85.7 KB

b910bbbb1939c6b31399233b29f10083.png
b910bbbb1939c6b31399233b29f10083.png897×859 133 KB

2fc98dc5263d6642345e4e4d44df0ecd.png
2fc98dc5263d6642345e4e4d44df0ecd.png720×613 50.2 KB

b54c6d6a9d534e580431631b1da28a9e.png
b54c6d6a9d534e580431631b1da28a9e.png706×611 92.3 KB

2

This awesome. @jlauer du u think it’s able to make a short video session about this feature to understand how the devices communicate and what to do that is running?

3

Yes, I’d like to try to get a video going this weekend. I got the Laser 5A working last night and it also reports back it’s amp consumption every 500ms so I can graph it out inside ChiliPeppr.

4

Sounds very cool, can’t wait to see this.

5

@Frank_Herrmann Here’s the vid https://plus.google.com/+JohnLauerGplus/posts/HdqeNVUjkza?cfem=1