M-Triangel PG-OneS import to LIghtburn

Lasers Fiber Lasers
1

Hello.

Came into possession of M-Triangel PG-OneS and struggling to connect to Lightburn.
Most tutorials reference Ezcad transfer, but all i have is SJTcad and its missing “markcfg7” file that i apparently need. LB finds this laser as “BSLfiber”, i do have COR file for lens correction, but for the life of me i cannot get it to frame.

Machine works properly while using SJTcad, but its not ideal (crashy and many other issues).

I do not have the original software that was supposed to come with this machine. Downloaded SJTcad from M-Triangel directly and it works.

Been running co2 gantry for a good while, but fiber/galvo is a new thing for me.

Anyone here running this machine in LB ? Or other M-Triangel machines ?

2

For questions specific to using Lightburn, https://forum.lightburnsoftware.com/ is probably going to find more people with direct experience.

3

Well, its more machine related than LB related topic.

But never mind, problem already sorted.

For future reference for anyone with the same problem - in LB you need to set red dot port to 0(zero) for it to frame with red dot. By default it is set to either port4 or port5. It probably is machine specific, M-Triangel PG-OneS.

Rest is manual calibration that i’m working through now…

1 Like