Last post for the day. Electronics.

General CNC CNC Routers
,
1

Last post for the day.
Electronics.
You R7 guys are the 1st in the know.

These were the internals of the all in one controller.

I have 4 qty MKS DLC boards. These are GRBL 1.1 based. Have every output you could desire.
10.00 each plus shipping.

Have 16 qty MKS LV8727. This is a 4A driver with controllable decay. These are what made the R7 so smooth at 1/16 microstepping, capable of 1/128 microstepping.
14 each plus shipping

Have about 6 or so 24-350 slimline PSU.
16.00 each plus shipping.

If you order the entire bundle I’ll throw in 3 qty JST jumpers and 4 qty SM 6 wire connectors.

5cd0cbec037241571a45a2a2919b1995.jpeg
5cd0cbec037241571a45a2a2919b1995.jpeg3024×4032 1.83 MB

2

3 qty DLC 12 qty Lv8727

3

I’ll take a bundle.

4

@Nathan_Ainsworth you got it sir, I’ll send an invoice tomorrow/Monday.

5

2qty DLC 8qty LV8727

6

Actually going to reduce the electronics by a set for @Colin_Kaminski till I know what he needs.

7

@Brandon_Satterfield I have everything I think except for connectors and wire. I have 4 stepper drivers, rPi, and the driver board. I have a ton of power supplies from work as leftovers from a peltier project I designed.

8

I’ll take a complete set/bundle if there any left.

9

10-4 @Colin_Kaminski let’s talk in hangouts and get you what you need. @Looper if you can sir hit me up on google hangouts. Your set is reserved.

10

Gone.