Hi
Got a laser machine from a friend and I’m trying to set it up.
IncSpace and K40 Whisperer installation were smooth (Thanks !!!) and successfully connected to the Laser. However, when pressing ‘initialize laser cutter’ button, the laser moves to top right corner, however K40 whisperer shows the origin at top left.
when I perform ‘Raster Engrave’ the text is engraved mirrored.
Pls note that I’m using a Win 11 operating system set for Hebrew (right to left) and trying to engrave Hebrew fonts.
Any tips on how to troubleshoot this will be most welcomed.