Just waiting for the cube to get fixed to print the adapters for my

3D Printing
,
1

Just waiting for the cube to get fixed to print the adapters for my endstops. I also had to adapt the z-drive threaded rod holder to fit standard sized nuts. So after those parts get printed it is completely ready to go!!!

Meanwhile I just painted the wood base to make for a cleaner setup. Plus the black hides some of the wiring better.

And the mesh covering will also be used to cover the thermoster, heater, and endstop wires. I just have to get more of it as I ran out!!

I will post the video of the first successful print!!

Regards,
Griffin P.

30d97d81465aafe2c254f9cd8a02de3e.jpeg
30d97d81465aafe2c254f9cd8a02de3e.jpeg640×852 190 KB

7499eaca9130a301167d95bc45d993b2.jpeg
7499eaca9130a301167d95bc45d993b2.jpeg640×852 241 KB

07694d0315acd5845607aaf2ac6fb35a.jpeg
07694d0315acd5845607aaf2ac6fb35a.jpeg640×852 194 KB

98a2bce2de80f99e90f61a7feef4146c.jpeg
98a2bce2de80f99e90f61a7feef4146c.jpeg640×852 235 KB

2

Which version of SmartRap is it? I have one of first and I like the differences.

3

@Mateusz_Perlak it is the .4.9. I was going to make an earlier version but by the time I got my money together they had moved onto this one.

Basically the main differences are that this one uses 6mm smooth rod in the x and y axis’ and the gt2 belt drive. It also features servo less autobed leveling. Looks to be a fairly good printer and the build process has been really easy to me.