It's so nice to have these Chilipeppr fixes live on my 6040CNC.

CAD & CAM Tool Chain ChiliPeppr
1

It’s so nice to have these Chilipeppr fixes live on my 6040CNC. It now runs flawlessly on a RaspberryPi 3, both backend and frontend!

08af95712f8689f783dfbcc0407e1d38.jpeg
08af95712f8689f783dfbcc0407e1d38.jpeg4032×3024 2.61 MB

4e6476a5087f512ac06cbd342afffcf7.jpeg
4e6476a5087f512ac06cbd342afffcf7.jpeg4032×3024 2.15 MB

7a605eadac40e3728f86cdc62ca415d6.jpeg
7a605eadac40e3728f86cdc62ca415d6.jpeg4032×3024 3.78 MB

329f1569207cc7635a1ad2a6559d8f46.jpeg
329f1569207cc7635a1ad2a6559d8f46.jpeg4032×3024 2.22 MB

2

What a fantastic build. You should do a video about how all the pieces of this came together.

3

Yes, i just think too, nice build. I think there are a few persons interested by more details. personally I am interested in the Rasperry Pi detailed setup…

4

I was just setting up my Pi3 for my 3040. Any notes on your setup would help. I had it working a few months ago before your CP version but something is not working now. I want to try using just SPJS on the Pi3 and Chilipeppr on my laptop but also want to be able to run Chilipeppr on Pi3 by itself.

5

@Steve_Anken you can follow my “boot to chromium” bit that I did within my octoprint post http://projectable.me - Raspberry Pi Touchscreen Octoprint Controller

6

Thank you.