I'm wondering what settings others use for support in PLA in Simplify3D ?

I’m wondering what settings others use for support in PLA in @Simplify3D ?

Currently I’m using:
15% infill
1% extra inflation
4 dense layers
70% dense infill
Support every 2nd layer

0.20mm horz offset
1 upper vert sep and 2 lower

Angles are 30/60/90

This is about as good as I’ve got it. It’s still very difficult to remove. I had someone print my printer parts (but in ABS) and the cleanup was 10x easier. Is this because it’s abs or something I’m missing on my PLA settings?

I used the stock support settings in Simplify with great results. Try that and see how it goes.

Stock support settings. If your filament is too hard to remove, you’re overextruding or have some other settings off.

Post some print pictures - top infill specifically.

Can someone post me a pic of what the defaults are? Or is there an easy way to restore the defaults but not mess w/ my other settings?

You can add another profile and it should be defaults there

@Griffin_Paquette ok thanks, I’ll try that