Yeah, what I don’t want is to have to deal with the assertions if they show up. I don’t have the sense that they are themselves careful about others’ copyrights, just ultimately trying to stay out of trouble. 
Sorry for uploading it, I did not think about it.
If you want me I will upload it to my personal drive and add a link.
@Tatarize I am sorry this does not help you. I am good with the guy that installed my laser and will ask him if he can ask the manufacturer for the software for M3 nano
I didn’t like deleting it, and I appreciate your being helpful!
I am good to set a link with the files in a zip archive?
You can decide what you host, I just don’t want to make copyright trouble here. This is tricky. 
As @Tatarize points out, they hacked an old version of Corel Draw. But that means that we could get in trouble that way too.
Oh, true that.
Yeah, if anybody else wants to send me things my email is tatarize at my gmail email. While I do not actually think the IP wishy-washy people behind the software (I’m thinking new software still does not exist) there absolutely is a second hand chance they include a pirated version of Corel Draw, and Adobe would absolutely come at you for that.
3 Likes
I will not post anything here then. If anyone needs the software feel free to write to me and I will send a link.
1 Like
Also this does help. They got the board in China fairly recently. If they had new software they wouldn’t send it to the people buying single boards but they should send it to folks buying new lasers. That they don’t, strongly implies that no such software existed 1 week ago + shipping from China time.
2 Likes
I wrote to my laser guy who buys lasers directly from china in ship containers and he did not see a new version yet. He will send it to me if he gets it since he saw I was really curious about it.
1 Like
http://www.3wcad.com/download.asp
Officialish links in China for the actual software that matches the boards. They are “protected” by that dongle.
I don’t even need the new version I probably just need a same saved .egv file with PPM turned on (mostly).
1 Like
I will be on the lookout to find something, I think that as time goes by some program will surface.
Edit:
I just downloaded this setup. If you want I can get Corel on my PC and try it out with your guidence. I can check if that dongle I got with the machine works
1 Like
Hello, I installed all 3 programs last night and just opened LaserDRW and Winseal XP since I don’t have CorelDraw. I tried to find the PPM modulation in these two, but could not find it. The USB dongle I got with the machine works.
Also, I saw I can import an EGV file but could not find how to save one and send here.
So if anybody knows where to look or if wants to connect to my PC and check I am open to help.
1 Like
I verified that the software was the old software. It can’t have an PPM modulation, it didn’t exist when that software was written I did everything that that software did to record what it sent to the laser during reverse engineering. You can switch over to K40 Whisperer or Meerk40t, there’s nothing in that software to control the PWM. It does not exist.
The upper left hand corner near the USB is a hardware pause switch. Other than that we still don’t know how to control the PWM. However there is a new issue that @scorch fixed for whisperer that suggested that the laser wasn’t turning off after @NSE and re-entering compact laser mode. The only reason to change that would be that somewhere in rapid mode the PWM was set, which strongly suspects that whatever it is that controls PWM is triggered in rapid mode. That makes some sense because I ruled out literally every letter and value combination in compact mode.
1 Like
Ola. Qual a diferença da Placa Nano M2 para a placa M3?°
Oque acrescentou na M3?
Hi Migudama! This forum is now (and for the foreseeable future) available entirely for free and without any advertisement. This means that there is no source of funds to pay for automatic machine translation. The common language on this forum is English, even though it is not the first language for many forum participants.
Please feel free to use machine translation like Google translate, Bing translate, or DeepL translator in order to post here in English, as well as to read responses.
The major differences are there’s two new headers one that does “multiplexing button” and another that does PWM. Mostly the button in the upper left does a hardware pause. So you can have a pause button and it’ll hardware pause a job in progress. The PWM is unknown. It should modulate the power doing power-width modulation power control, but it’s hooked directly into the CPU. This means it’s controlled somehow with the bytecode that gets sent to the processor, but we don’t know what triggers it.
We’ve run through all the letters in the alphabet and a few symbols that occupy the same region on the ascii table.But, none of them take a value (we figured 000 to 255 since that’s how the rest of the code is written).
Las principales diferencias son que hay dos encabezados nuevos, uno que hace “botón de multiplexación” y otro que hace PWM. Principalmente, el botón en la parte superior izquierda hace una pausa de hardware. Entonces puede tener un botón de pausa y el hardware pausará un trabajo en progreso. El PWM es desconocido. Debería modular la potencia mediante el control de potencia de modulación de ancho de potencia, pero está conectado directamente a la CPU. Esto significa que se controla de alguna manera con el código de bytes que se envía al procesador, pero no sabemos qué lo activa.
Hemos repasado todas las letras del alfabeto y algunos símbolos que ocupan la misma región en la tabla ascii. Pero ninguno de ellos toma un valor (calculamos de 000 a 255 ya que así es como se escribe el resto del código) .
Could you share to me that M3 Nano special software?
Hi,
It turned out it is not M3 Nano specific but all for M2 Nano as Tatarize analyzed it.
hello ,can you help me? i need m3 nano driver , where i can download the driver. thks
You might start reading from the top of this thread: