I removed the frame (thanks for advice Ashley M.

gplus
(Gary McKinnon) #1

I removed the frame (thanks for advice @Ashley_M_Kirchner_No ), removed the horrible ducting and have begun removing the support posts for the old bed. I think i’ll get some threaded brass rod in there instead and rig a poor man’s z-table.

Have been lazy and ordered a premade honeycomb bed.

The connecter between the stepper and board can’t be unplugged at either end so i’ll have to keep the frame near the chassis while modding.

(Ashley M. Kirchner [Norym]) #2

The ribbon cable is held in place by friction pins inside of that white connector. Use the blue “tab” to pull on it.